Drop shot lead weights

[sparkchaser]

I'm with Mac, if you can make bass casting sinkers I would buy some. 1 to 1 1/2 oz.

[wadefisherman]

I haven't experienced any line twist issues with the walkers.

[IAMMAC]

I haven't experienced any line twist issues with the walkers.

When I used yours last week they twisted my line really bad.  You proudly didn't notice cause you have a swivel.

[wadefisherman]

True, I use a swivel above everything.

[BloodyDuck2]

I'm working on that.

[BloodyDuck2]

Okay the drop shot molds are here. I will call as soon as I can get the order filled.

[BloodyDuck2]

Orders are ready. PLEASE Call me, IF you have not gotten a call or picked/dropped off to you, as I am being bombarded with business and I am in constant pour mode.

[OneBlade]

So I am in the market for some of the bass casting sinkers as well but don't need 100.  I'd like to get 10-25 of the 1oz and 1 1/2oz. 

BloodyDuck2, do you make this style?

If not, perhaps IAMMAC, Sparkchaser, others want to split this 1oz set?
http://www.ebay.com/itm/100ct-1oz-bass-casting-w-swivel-weights-sinkers-fishing-lead-drop-sinker-/160937140469?_trksid=p2054897.l4276

And this 1 1/2oz one?
http://www.ebay.com/itm/50ct-1-1-2oz-bass-casting-w-swivel-weights-sinkers-fishing-lead-drop-sinker-/161025245654?_trksid=p2054897.l4276

[ArZFisher]

If not, perhaps IAMMAC, Sparkchaser, others want to split this 1oz set?
http://www.ebay.com/itm/100ct-1oz-bass-casting-w-swivel-weights-sinkers-fishing-lead-drop-sinker-/160937140469?_trksid=p2054897.l4276

And this 1 1/2oz one?
http://www.ebay.com/itm/50ct-1-1-2oz-bass-casting-w-swivel-weights-sinkers-fishing-lead-drop-sinker-/161025245654?_trksid=p2054897.l4276

I would spilt some with you. I need both 1oz & 1.5oz if bloodyduck can do it??  And the cost it would be ??

I personally would like ask you Bloodyduck if you got any molds for pyramid sinkers. I have used a couple 1oz I got from Sportsmans and they work pretty good. I just want to change the design around. I was looking for the swievel to be on top of pyramid instead of bottom. If u need I got a pyramid one here I have been using I can take a pic to show you what I don't like. My buddy said he could make molds that I want at his work.  ?

[OneBlade]

To get cost, I need to know if anyone else interested in 1oz or 1 1/2oz casting sinkers assuming cost is o.k. 

Others - let me know if you are interested and then I'll figure out cost on ebay.  If we hear from BloodyDuck, we can go with him.  I'd like to pull the trigger this week as I'll have some tying to do once I get everything in.