Bench Seats

[Philbie]

I have an older V bottom 14' aluminum boat that will need new bench seats installed.  I did this a couple years ago with plywood and a sealer but they have started to come apart.  I'm entertaining using something different for material, maybe some type of 3/4" plastic.  I also want to install seat pedistals.  Any ideas, sugestions on material, local location to get materials.

[sandman]

Fiberglass the plywood and they will last forever. Easy DIY project.

Be careful with pedestals on a 14' V-boat. The center of gravity needs to stay low for stability. I would stick with 4-6" max height.

[BloodyDuck2]

Phil my neighbor does upholstery call me if you need any help with where to get marine grade vinyl or any thing else.

Bill 602-980-9819